Acrylic type: casting
Surface finish: 1 side glossy mirror, 1 side grey backing
Transmission: opaque
UV resistant: 15 years
Edge finish: laser cut or saw cut edge
Fabrication methods: laser cutter, CNC, saw, grinder, drill, hot bender
MUST READ
+ Mirror acrylic sheets must be installed using neutral-cure adhesive such as Neutral Silicone Glue (click to view recommended products in Bunnings) or Double-sided Mounting Tape (click to view recommended products in Bunnings). The use of corrosive or solvent-based adhesives may damage the backing and mirror finish.
+ Acrylic mirror sheets exhibit slight optical distortion, which is generally not noticeable in typical signage and decorative applications, when supplied in sizes larger than 600*600mm (3mm thick) or 400*400mm (1.5mm thick). This is a natural material characteristic of all acrylic mirror sheets, as the surface is not perfectly flat like glass.
To minimise distortion, we recommend fixing the acrylic sheet onto a flat MDF backing board. Apply a uniform layer of neutral silicone adhesive to the rear surface and place an evenly distributed flat weight on top until the adhesive has fully cured.
For applications requiring high-precision reflection, a glass mirror sheet is recommended instead of an acrylic mirror.
* By placing an order, you acknowledge and accept the above material characteristics and installation requirements. Returns are accepted only if the protective films remain intact.
Cut-to-size fee starts from $60 incl GST, depending on the complexity of the cutting requirements, plus material cost.
Please submit a contact form or email us with the colour code, thickness, dimensions, quantity and delivery address. We will provide a quote for you.
We also have below cutting options available, please add them to the enquiry if you need.
+ Rounded corners
+ Diagonal corners
+ Drill holes
+ Hot bend
Examples:
1) You purchase one sheet of clear 900×600×3mm at $17.50 per sheet, and request a simple straight cut.
• Cut-to-size fee: $60 (file & machine setup fee + time-based cutting charge)
• Plus material cost: $17.50
• Total: $77.50 incl GST
2) You purchase five sheets of clear 900×600×3mm at $17.50 per sheet, and request a complex cutting.
• Cut-to-size fee: $90 (file & machine setup fee + time-based cutting charge)
• Plus material cost: $87.50 ($17.50 × 5)
• Total: $177.50 incl GST
MUST READ
Please carefully check your drawings before placing your order.
All Cut-to-Size orders are CNC machined in a single automated process. Rework machining is considerably more difficult because the previously cut sheet must be manually repositioned and realigned in the machine. Even a simple cut line or an extra hole can be challenging.
If rework machining is required, please contact us for a technical assessment. Where feasible, a minimum machining fee of $60 incl GST will apply. Due to manual realignment, dimensional variations of approximately ±3–10 mm may occur, depending on the overall sheet size.
Not all rework requests are feasible. In many cases, making a new sheet is the preferred solution.
Full-size (1220×2440mm) acrylic sheets can be purchased directly from our website only if you are able to pick them up from our warehouse. Please DO NOT select shipping at checkout for full-size sheets as shipping fees will not be calculated correctly.
If you require delivery for full-size sheets, please submit a contact form or email us with the colour code, thickness, quantity and delivery address for a freight quote.
